Cathelco Seafresh Products

Desalinators for Commercial/Naval Vessels

The Ton and H2O series desalinators are suitable for a wide variety of commercial and naval vessels.

Cathelco Seafresh Desalinators for Commercial/Naval Vessels

Yacht Desalinators

Easy to install and operate, Cathelco Seafresh desalinators are available in a range of sizes for sailing and motor yachts.

Cathelco Seafresh Yacht Desalinators

• Seafresh 'Ton' Series
  With the capacity to produce 10 to 40 cubic metres of potable water per day, the Ton' series is completely automatic in operation and provides potable water for the full range of drinking, washing and cleaning requirements.
• Seafresh 'H2O' Series
  The H2O series comes in either automatic or manual models with the capacity to produce outputs from 32 to 276 litres per hour.

• Seafresh 'Ton' Series
  With the capacity to produce 10 to 40 cubic metres of potable water per day, the 'Ton' series is ideally suited to the requirements of the largest super yachts as well as the needs of many types of commercial vessels.
• Seafresh 'H2O' Series
  Ideal for the requirements of medium to large sailing yachts and cruisers, the H2O series comes in either automatic or manual models with the capability to produce outputs from 36 to 276 litres per hour.
• Seafresh 'Ocean' Series
  These ultra-compact desalinators are the answer to watermaking on small to mid-sized sailing yachts where space is at a premium.

Optional Extras

Cathelco Seafresh Optional Extras

Pumps

Cathelco Seafresh Pumps

• Fresh water flush
  This is used to flush the plant with potable water when it is being used intermittently, keeping the system fresh for up to eight weeks without the need to preserve it. Any contaminants are removed, ensuring the maximum extension of membrane life.
• Active carbon filters
  Removes dissolved gases (including chlorine), tastes and odours to improve the taste of the product water. This unit uses the same housing as the pre-filtration cartridges for compatibility and ease of replacement.
• Air trap
  Separates air from sea water in the sea inlets, ensuring a constant flow to the desalinator pump. This avoids the damaging effects of water starvation on the equipment, particularly on craft with high speed hulls running on air/water emulsion.
• Spares Kit
  The Standard Spares Kit includes pre-filter elements, plus a range of replacement consumable items including oil for the high pressure pump, various seals, disinfectant and preservative powder, plus a service kit for the primer pump. An Extended 2 Years Spares Kit is also available including all of the above, pluss a comprehensive range of electrical spares and items for mechanical servicing.
• Heat Exchanger/Preheater
  A pre-heater is required when the sea water intake temperature is below 8 degrees Centigrade to ensure efficient running of the RO plant and avoid damage to the membranes. Various types are available, the most common being a heat exchanger utilising waste heat from the engines. The other main type involves an element which heats the feed water directly.
• Ultraviolet Steriliser
  The unit sterilises the water to be completely free from bacteria, parasites and algae spores. This can be used as a pre-treatment when operating in dirty waters and as a post treatment if the water has been held in storage for long periods of time.

• Feed Pumps
  The feed pump delivers water to the pre-filters which have elements of 50 microns and 5 microns before it passes to the high pressure pumps. A choice of models is available which can be run for AC or DC power supplies.
• High Pressure Pumps
  These pumps operate at pressures of up to 800 psi and are designed to force the seawater through the reverse osmosis membranes where salt and other impurities are removed. Built for long lasting reliability, the pumps have triple plungers, a nickel aluminium bronze pump head and an oil bath crankshaft in an alloy crankcase. They are available in close coupled or belt driven types from a variety of input voltages